My first Americana, Part 1: The beautiful die-cast works of Castline and Greenlight

The blog has been quiet but I have been not. I have got so much stuff to get through that I just don’t know how I am going to manage it all before the year is out on top of my other commitments. But I am glad to finally be getting some stuff out.

It can be hard “diversifying” your die-cast collection in the UK. Most shops only stock Hot Wheels and chinese-knock off brands, and even then, distribution means if you’re a dedicated enthusiast you’re likely to be waiting weeks, even months, before any new models hit the shelves.

Matchbox are stocked in a few places, but finding new models is restricted only to Asda, and refer to the first paragraph for reasons why I still don’t have anything new.

American brands like M2 Machines, Greenlight, Auto World, and even most Hot Wheels special series never arrive here, so we have to pay through the nose to get them. I finally decided to take the plunge and spend some money on M2 and Greenlight. I’d read extensively about them and it seems that, despite the odd quality control issue, they’re very popular, and after discussing it with a friend, he encouraged me to go for it. And so I ordered two batches of models, and a third is on the way – and there were some other models trickling in besides.

I will be uploading several posts for these, since it is taking a long time for me to sort through all the photographs, so please be patient, and enjoy!

Batch one


The first set of models to arrive included the Greenlight Hitch and Tow Dodge Monaco with Airstream Bambi, Shasta Airflyte, Volkswagen T2 bus, and the M2 Machines Ford Fairlane 500, Mercury Turnpike Cruiser, Buick Skylark, and Dodge Royal Lancer D500.

1957 Dodge Custom Royal Lancer D500


The Dodge was the first model I opened so it’s the first model I’m going to feature. It’s quite difficult to get non stock images of M2 Machines that aren’t video reviews, so it was hard to judge just how well these cars look out of the box. So here’s my take on them.


As a general rule, M2 Machines appear to be very detailed, heavy, but delicate. I have only just opened myself up to them, and some testimony from friends reveals that quality control has, in the past, been an issue, but this is apparently something that Castline has been working on. I did have some issues with my models. With this Dodge, for example, the bonnet (hood) didn’t sit well, so I stuck it down with some tac. There was a misaligned passenger side door, so I had to unscrew it and loosen it off so it sits flush (well, more flush than it did). All in all, not encouraging, but the level of detail on the car made me think it was a very small, niggly issue. Nothing to spit the dummy about.


That, and fit and finish issues are usually problems that can be applied to any die-cast brand. I’ve had a few Majorettes where the bonnet didn’t fit perfectly or the door didn’t snap shut cleanly and it never bothered me much, and even paying a little extra for these M2 Machines doesn’t make it much more than a slight distraction for me. But this 1959 Dodge does have one issue, which I will be keen to point out for any who want a judgment of the quality of the casting. Look at the placement of the rear axles.


I don’t know if I am the only one who can see this, but there is something not quite right about the placement of the rear wheels on the model. The wheel arch seems all right, but the positioning of the wheel seems a little too far back. From some angles it doesn’t bother me, but from others it does. I’ll let you decide!


Like all but one of the M2 Machines that joined the die-cast family, this Dodge is from the Auto-Thentics line. When you first begin to look into M2 Machines it can be a little overwhelming seeing all the different lines they do – Auto-Thentics, Auto-Haulers, Auto-Wheels, Auto-Drivers, Auto-Trucks, Auto-Lift, Auto-Trucks… the list goes on. But Auto-Thentics are seemingly the high-quality line. They have metal bodies, metal bases, opening parts, and separate light pieces, which makes them look phenomenally detailed – and they do.


Every angle of the car looks fabulous (excepting the rear wheel, which looks particularly bad for me in the above photo!) with its separate tail lights, chrome bumpers, unreadable decals, and even a separately attached chrome hood ornament. The wheels are fantastically detailed and accurate to the real life vvehicle, and while the colour schemes sometimes may be a bit lacklustre (this two-tone grey is rather business-like – I want my 50s cars to be fabulous blue, pinks and pastels) the quality is generally very high. The photos probably do not do this one justice – the darker, charcoal grey middle is a nice sparkly metallic, offset nicely by the gloss moonstone grey.

1957 Ford Fairlane 500


The next car to roll off the M2 Machines delivery truck was this fabulous Ford Fairlane in Berkshire green and Colonial white.


It wouldn’t be right to ignore the best-selling car in the USA for 1957. Initially I had wanted the two-tone green model, but as the early releases are so hard to find, I settled on the white and green model.


Moviegoers should recall that in Hitchcock’s Psycho, Janet Leigh abandoned her 1956 Ford Mainline at a convenient Ford dealer to replace it with a 1957 Ford Custom (there was a nice collection of Edsels in the movie, too).


And while this is indeed a 1957 Ford like hers, this isn’t a Custom 300 – this is the highest trim available (of course), the Fairlane 500. The Fairlane had a longer wheelbase, at 118 inches, than the Custom lines.


The model is beautiful, and so are all M2 Machines, so I won’t bore you too much by waxing lyrical about how well they have captured the long flanks and tail fins of the cars. But what I will mention is these cars are sometimes victim of poorly fitting doors and bonnets, something one might expect to happen with all the moving parts. Fortunately M2 Machines do fit together with screws so they can easily be taken apart and adjusted.


Lastly, I think M2 Machines could have done slightly better execution on the Ford’s “eyebrows” – I think they’re more pronounced than they have managed here – but all in all they’ve captured the car brilliantly. One of the wheels was a little stiff but it does roll when on a grippy surface. And the detailing is just excellent. You can barely see “Fairlane” written on the bonnet – it’s so fine. The wheels appear to be accurate.

1954 Buick Skylark


1954 was a bad year for the Buick Roadmaster Skylark. This beautiful big blue Buick has a sad face, and it’s no surprise, since the ’54 was the last year of the Skylark’s existence until it returned under the guise of special trim in 1961.


I was especially impressed with the fit and finish on this Buick – the doors and hood sit flush and tight, the chrome is nicely fitted and the tampo application is spot-on. When the Buick Skylark was introduced in 1953 it looked a lot different to the cleaner lines of the 1954 model, yet the shape, which was influenced by the Jaguar XK series introduced the same time, can still be seen, I think. Do you see it too?


I think the swoopy fenders give it away. I love the Jaguar, so that might explain why this Buick looks so good too. And I love the signature Buick grille – it’s a fusion of US extravagance and European stylishness.


You can see similarities around the back too, I think. This is a 1954 Jaguar XK by Matchbox, and it’s cool to have two cars of the same year side-by-side. The detail on the Matchbox is stunning for a $1 toy, but let’s not get sidetracked.


The photographs really speak for themselves with these cars. The lettering is easy to read on the front but probably suffers from being oversized to those who look for extreme accuracy with the design. But you have to love the hood ornament.


On the rear of the car we are treated to these fantastic chrome fins, separate pieces to the car, and that is where M2 Machines are so commendable. Each cars comes with 40-50 separate pieces as advertised on the packaging, giving the cars such intricate detail – a feat proudly advertised. See also the chrome bumpers, separate lenses for the tail lights, twin exhausts, and the Skylark branding there on the trunk. From this angle you can also make out some interior detail – it is really something to behold, no pizza-dish steering wheels here.


The wheels are beautiful, and the camera does not do the paint job justice. The metalflake blue sparkles brilliantly in the right light. I also love the two-tone blue interior. Truly special to any Buick lovers.


1957 Mercury Turnpike Cruiser

My favourite car of the first set of M2 Machines I ordered. This model is absolutely wonderful.

Merc1Car historians will know immediately that this is the Turnpike Cruiser, or the high-end Mercury offering, by the anodized strip in the tail fin. The reason this car holds so much attraction for me is that it shares a lot of similarities with the Edsel, which was built late in 1957 for the 1958 model year. The roof line of the Mercury can be seen on the Edsel Corsair and Citation series, while the clean, sharp lines carried over with the lack of tail fins on the Edsel cars.


The lines of the mercury are beautifully captured by M2. The rear especially is something to behold. The light lenses, chrome bumpers and ornaments all fit together so beautifully here.


Strangely enough, there is a door fitment issue on this model, but it’s with the driver’s side door, which is closed when in the box. The passenger side door, which is open (strangely – I can’t understand why, since you can’t see the car very well on the passenger side due to the cardboard backing) fits very nicely.


Here you can see better the door fitment issue. It is not much, and while on display it would never bug you, but on photographs the problem is exacerbated, and I have known collectors to digitally alter images to correct door misalignment. I don’t worry too much about it. I think the car otherwise looks very beautiful, and it very heavy.


It’s always worth remembering that these cars have metal bodies, metal bases, and many parts, so they are in fact very heavy, and feel quite delicate, especially with all the extra bits of trim. I have had bumpers fall off, but a little glue and patience fixes everything. Above you can see the hood ornament, which looks quite large in comparison to the car.


My favourite part about the Mercury is the intricate attention to detail and knowledge of the model. Castline have paid attention to all the technological innovations on the car with the addition of the “Twin Jet” fresh air intakes above the windshield and the “Breezeway” rear window to give air-flow through the car – the rear window is open on the model, and it took me a while to notice, too. That’s super cool. I also love that they stuck the second emblem on the car on the trunk, behind the open “Breezeway” window.


Isn’t that front “M” below the grille super cool attention to detail? I love it. it’s interesting to note also that the colour scheme is real, seemingly, and I spied one that looks just like it here on the Heacock Classic website.

Photo credit to Bob Dekorne on

That’s all for part 1 – I hope you’ve enjoyed the photos as much as I enjoyed taking them. In the next post I’ll be examining the Greenlight models also purchased from this batch. Until then!



One thought on “My first Americana, Part 1: The beautiful die-cast works of Castline and Greenlight

Add yours

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Up ↑

%d bloggers like this: